Paitec MX-9000 User Manual page 18

Z-Fold Setting
Upper Cassette
Paper
Infeed
Direction
Stopper
Lower Cassette
When setting a Z-Fold, please read the following steps.
1. Measure the length from line 1 to line 2 of the form as indicated in the
image above. That measurement is the fold setting for the first (upper
cassette) fold.
2. Measure the length from line 2 to line 3 of the form as indicated in the
image above. That measurement is the fold setting for the second
(lower cassette) fold.
3
Second Fold
(Lower Cassette)
- 17 -
MX-9000 User Manual
2
First Fold
(Upper Cassette)
Infeed Direction
Outfeed
Direction
1