Paitec MX-9000 User Manual page 11

1. Mode - Displays current status of the machine.
2. Speed - Displays the machine's current set speed.
3. ( - ) Button - Decreases the speed or value.
4. Printer Inline Button - Changes to online/offline mode. (operable only at online
5. Batch Counter Button - You can set the number of forms that you wish to process and
have the machine stop automatically until you press the start button. For example, if
you set the batch counter at 100, after 100 forms are processed, the machine will
automatically stop and will not start until you press the start button.
- Press the batch counter button and the light will blink.
- Change the displayed value by using +/- button and when ready, press the set
button.
- When changing the value, press the batch counter button to increase the value
by 50 up to 500.
- This setting is not stored after rebooting the machine.
6. Thickness Sensor Button - Thickness sensor function allows you to prevent any
serious paper jams caused by double feeding or multiple sheet feeding.
- Press the thickness sensor button and one form will feed.
- The form stops and is scanned by the thickness sensor.
- After the reading is completed, the form then processes through.
- The LED light will remain on and your desired thickness is stored in the setting.
- Feeding of any forms outside of the calibrated setting will stop the machine from
further processing while using this function.
Reference
- Whenever you change to a different form, please reset the thickness
value by following the steps indicated above.
- Using the same setting with a different paper will stop the machine as the
form will be recognized as a double feed.
7. Jam Free Button - Clears any jam in the press roller unit.
Important
- Jam free function will not clear all jams. If a jam is not cleared with this function,
please refer to the next chapter on handling errors.
mode)
- 10 -
MX-9000 User Manual