Needle Thread Preparation; Threading The Needle Thread - JUKI HZL-F Series Instruction Manual
Hide thumbs
Also See for HZL-F Series:
- Instruction manual (168 pages) ,
- Insrtuction manual (104 pages) ,
- Service manual (32 pages)
Table of Contents
Advertisement
Needle thread preparation
Threading the needle thread
4
1
* Align the marking at the hand wheel with the one on the machine body.
1
24
3
2
5
Lift the presser foot lifting lever.
Note:
Make sure to push the needle to the top.
It is impossible to perform stitching if the
needle is not correctly installed or a bent
needle is used. Pay close attention as this will
cause machine malfunction.
* Use the needle: No.11-16
and the thread: No.30-90.
When twin needle is used, the automatic
*
needle threader can not be used.
Advertisement
Table of Contents
