Troubleshooting - IKEA LAGAN Manual

ENGLISH
General information
Warning! Switch the appliance off
and let it cool down before you
clean it.
Warning! Do not clean the
appliance with steam blasters or
high-pressure cleaners.
Warning! Do not use abrasive
cleaners, steel wool pads or acids.
They damage the appliance.
To remove any food remains, wash the
enamelled elements, caps and crowns, with
warm soapy water.
Wash stainless steel elements with water,
and dry with a soft cloth.
This model is equipped with an electrical
ignition. To avoid problems with lightning,

Troubleshooting

Warning! Refer to Safety
chapters.
What to do if...
Problem
There is no spark when light‐
ning the gas.
The flame is extinguishes im‐
mediately after lightning.
The gas ring burns unevenly.
keep the ceramic "candle" with electrode
clean.
After cleaning, be sure to wipe dry with a
soft cloth.
Possible cause
There is no electrical supply.
There is no electrical supply.
Burner cap and crown are
placed incorrectly.
Thermocouple is not heated
enough.
Burner crown is blocked with
food residues.
Do not put the pan supports in a
dishwasher. Wash them manually
and dry with a soft cloth. After
cleaning, make sure that the pan
supports are in correct position.
To check the conditions of the gas
supply pipe and the pressure
adjuster, contact the After Sales
Service Provider. The service is
not free of charge.
Check if the unit is plugged in
and the electrical supply is
switched on.
Check the house electric in‐
stallation fuse.
Check if the burner cap and
crown are placed correctly.
After lightning the flame,
keep the knob pushed for
about 5 seconds.
Check if the main injector
and the burner crown are not
blocked with food remains.
36
Remedy