InFocus INF6501C User Manual page 51

No sound
LED Indicators
FRONT LED
(near IR sensor)
Off
Red
Green
Orange
For additional troubleshooting support, please contact:
InFocus Corporation - Technical Support
6am-5pm PST
877-388-8385
www.infocus.com/support
INF6501c/INF6501w User Guide
• If using external speakers, verify that the speakers are connected properly and that the
speaker power switch is turned on.
• If internal speakers are the only speakers being used, verify that the Audio menu
Speaker setting is set to Internal.
• If using an external source, such as component, verify that an audio cable is correctly
installed between the device and the monitor.
• Using the remote, verify the volume is turned up enough and not muted.
• If playing a video, verify the playback has not been paused and that the video's audio
has not been muted.
• An HDMI® 1.3 (or higher) source and source device is required to hear audio via the
HDMI cable.
SOLUTION
• The monitor is powered off. Press the Power button on the remote or keypad. If that
does not work: 1) verify the power cord is properly connected to the power outlet and
to the monitor; 2)verify that the power switch on the back of the unit is turned on; 3)
plug another electrical device to the power outlet to verify that the outlet is supplying
the proper voltage.
• The monitor is in standby mode. Press the Power button on the remote or keypad.
• The monitor is powered on.
• The source signal is out of range.
Page 49