Do's & Don'ts For Blades; Wet Cut Blades - Sawmaster R1048 Owner's Manual

Do's & Don'ts For Blades

Wet Cut Blades

DO'S
Inspect blades daily for cracks
•
or uneven wear.
Always use appropriate blade
•
for material being cut.
Inspect arbor shaft for uneven
•
wear before mounting blade.
Always use blades with the
•
correct arbor shaft size.
Ensure that blade is mounted
•
in the correct direction.
Secure the blade to the arbor
•
with a wrench.
• Use proper safety equipment
when operating the saw.
Periodically check the blade
•
for cracks or bond fatigue.
• Always have continuous flow
of water on both sides of
blade.
DON'TS
Do not operate the saw without
•
safety guards in position.
Do no operate the saw with
•
blades larger than 10".
Do not cut dry with blades
•
marked "Use Wet".
Do not exceed manufacturer's
•
recommeded maximum RPM.
Do not force blade into mate-
•
rial. Let blade cut at its own
speed.
16