Table of Contents
Advertisement
OPERATION
15. Cleaning (cont'd)
Power up the system, touch the
to release and remove the water tank, fill
1000ml of fresh water into the water tank, adding a pack of descaling agent.
Touch the
four times to enter the cleaning function. You will notice the screen
displays CLE, the time of 20:00 and current water level.
Touch
to start the program.
Once to cleaning program is finished wait 1 minute, take out the water tank and
clean. Fill the water tank with fresh water and repeat the cleaning program.
Note: This appliance should not be
shut down during the program. If it does shut down
before the end of the program the cleaning program
must be selected and started again.
16. Reset / Child safety lock
To reset, while inputting functions, programs, times, temperatures etc. touch the
To lock, press and hold
for 3 seconds, there will be a long beep to inform
you that you have entered the child safety lock state and you will notice a
on
the screen. To unlock, press and hold
for 3 seconds again and there will be
another beep to indicate the child safety lock has been released and the
will
disappear.
17. Display Functionality
Whilst choosing settings, the oven will confirm an option automatically if you do not
touch a button for 10 seconds. (Excluding when you initially set the clock on first use.)
When the appliance is in the setting or paused state, including the auto menu and
defrost program, if there is no operation in 5 minutes it will turn itself off.
The oven light will be on at all times that the door is open or the oven is paused.
If the oven door is opened during the cooking process you must touch the
to
continue cooking.
The
can be touched in any state to release the water tank.
15
Advertisement
Table of Contents
