4
Installation
Recommendations for instrument setup
Alternative instrument setups for additional
functionality
The standard stack setups can be upgraded with additional valves to add
additional functionality. Table 2 gives an overview of all supported modifications
of a standard 2D-LC instrument. At a time, only one modification is
recommended to ensure correct operation of the instrument. The standard stack
setup uses one column compartment that hosts both the
Table 4
List up supported modifications of a standard 2D-LC instrument configuration.
Alternative column compartment
concepts
A
1
D MCT/TCC hosts column
switching valve
B
Setups that contain separate
1
2
D and
D MCTs/TCCs
C
1
Setups in which the
umn is hosted in an Inte-
grated Column Compartment
(ICC)
D
Setup with a MS diverter
valve
E
1
2
Setup of a
D/
D Switching
Valve
F
1
2
D/
D Switching Valve w/o
1
D detector
2D-LC - User Guide
Comment
If a 6-position/14-port or 8-position/18-port InfinityLab Quick
Change Valve is used, additional two adapters necessary
(2xG1316-87326, must be purchased separately)
Longer capillary (5500-1170) for Quick Connect Fitting at col-
D col-
umn inlet or new 0.12x280mm Quick Connect Fitting assem-
bly (5067-5960) necessary (must be purchased separately).
1
2
If a
D and
D detector is used; not supported with modifica-
tions A-C
For setups that do not have a
LCxLC setups or setups with a QQQ mass spectrometer as a
2
D detector; not supported with modifications A-C
1
D detector, e.g. for certain
1
2
D and
D column.
Page
See
Figure 30
on
page 67
See
Figure 31
on
page 68
See
Figure 32
on
page 69
See
Figure 33
on
page 71
See
Figure 34
on
page 73
See
Figure 35
on
page 74
66