Clearing Jams - King Canada 8216S-2 Instruction Manual

16ga. x 2” n type medium crown stapler

Table of Contents

LOADING STAPLER & CLEARING JAMS

LOADING STAPLER MAGAZINE

• Disconnect the air hose from the stapler air inlet.

• Pull all the way back on the feeder shoe until it reaches the feeder shoe lock, lift feeder shoe to

engage the lock.

• Place a stick of staples over the hanging rail of the magazine so that the legs of the staples

straddle.

• Unlock the feeder shoe and release the feeder shoe forward.

CLEARING JAMS

Disconnect the stapler from the air compressor before adjusting, clearing jams, servicing,

relocating and during non-operation.

• Disconnect the air hose from the stapler air inlet.

• Pull back on the feeder shoe, lock it into place and remove all staples.

• Remove 4 cap screws (A), lower front plate (B) and front plate (C).

• Remove jammed staple, replace front plate, lower front plate and cap screws securely.

Table of Contents