Related Manuals for King Canada 8216S-2
Summary of Contents for King Canada 8216S-2
- Page 1 16GA. X 2” N TYPE MEDIUM CROWN STAPLER MODEL: 8216S-2 INSTRUCTION MANUAL COPYRIGHT © 2015 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
-
Page 2: Warranty Information
Please keep your dated proof of purchase for warranty and servicing purposes. REPLACEMENT PARTS Replacement parts for this product are available at our authorized King Canada service centers across Canada. Please use the 10 digit part numbers listed in this manual for all part orders where applicable. -
Page 3: Specifications
Safety release Staple discharge area Magazine Magazine feeder shoe SPECIFICATIONS Model ......................................8216S-2 Air inlet ......................................1/4” NPT Compressed air: Maximum permissible operating pressure ........................120 PSIG (8.3 bar) Recommended operating pressure range ..........................70-120 PSI Staple range ....................16ga. x 7/16” N Type medium crown staples from 3/4” to 2”... -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS • Read and understand this manual and all the safety instructions before operating this stapler. If you have any questions, please contact our authorized service centres or retailers for help. • Never allow the use of flammable gases as a power source for the stapler. Use filtered, lubricated and regulated compressed air only. -
Page 5: Lubrication And Maintenance
LUBRICATION AIR SUPPLY AND CONNECTIONS LUBRICATION AND MAINTENANCE • Your stapler needs to be lubicated before and after the first time you use it. • Disconnect the air supply from the stapler before lubricating. • Turn the stapler so that the inlet is facing up and put ONE DROP of high speed spindle oil or oil without detergent into the air inlet. - Page 6 CONTACT SAFETY TRIP MECHANISM OPERATING A CONTACT SAFETY TRIP TOOL: • The operator is required to have the finger off the trigger and the nose of the stapler to be placed on the workpiece. • The contact safety trip mechanism is then depressed against the workpiece and the trigger is pulled to drive the staple.
-
Page 7: Clearing Jams
LOADING STAPLER & CLEARING JAMS LOADING STAPLER MAGAZINE • Disconnect the air hose from the stapler air inlet. • Pull all the way back on the feeder shoe until it reaches the feeder shoe lock, lift feeder shoe to engage the lock. •... - Page 8 OPERATING YOUR STAPLER OPERATING YOUR STAPLER WARNING! protect your eyes and ears. Wear Z87 safety glasses with side shields. Wear hearing protection. Employers are responsible for ensuring the user or anyone near the stapler wears the above mentioned safety protection. WARNING! Check and replace any damaged or worn components.
-
Page 9: Maintenance And Troubleshooting
Accessory Kit is available for your Stapler (model: KW-147). Contact your local King Canada distributor for more information. PARTS DIAGRAM & PARTS LISTS Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list. KW-147...