King Canada 8332 Instruction Manual

Variable speed orbital jig saw kit

Download this manual

Enlarged version

VARIABLE SPEED ORBITAL

JIG SAW KIT

MODEL: 8332

performance

plus

IMPORTANT INFORMATION

2-YEAR

LIMITED WARRANTY

FOR THIS JIG SAW

PROOF OF PURCHASE

Please keep your dated proof of purchase for warranty and servicing purposes.

LIMITED TOOL WARRANTY

KING CANADA makes every effort to ensure that this product meets high quality

and durability standards. KING CANADA warrants to the original retail consumer a

2-year limited warranty as of the date the product was purchased at retail and that

each product is free from defects in materials. Warranty does not apply to defects

due directly or indirectly to misuse, abuse, negligence or accidents, repairs or

alterations and lack of maintenance. KING CANADA shall in no event be liable for

death, injuries to persons or property or for incidental, special or consequential

damages arising from the use of our products. To take advantage of this warranty,

the product or part must be returned for examination by the retailer. Shipping and

handling charges may apply. If a defect is found, KING CANADA will either repair

or replace the product.

KING CANADA TOOLS

OFFERS A 2-YEAR LIMITED WARANTY

FOR NON-COMMERCIAL USE.

Page 1: Important Information
Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents, repairs or alterations and lack of maintenance. KING CANADA shall in no event be liable for death, injuries to persons or property or for incidental, special or consequential damages arising from the use of our products.
Page 2: Specifications
GENERAL & SPECIFIC SPECIFICATIONS & SAFETY INSTRUCTIONS ELECTRICAL INFORMATION 1. KNOW YOUR TOOL Read and understand the owners manual and labels affixed to the tool. Learn its WARNING!: If any parts are missing, do WARNING!: Do not use this product as a application and limitations as well as its specific potential hazards.
Page 3 GETTING TO KNOW ASSEMBLY & OPERATION YOUR JIG SAW INSTALLING/REMOVING BLADE Getting to know your Jig Saw Warning! Always make sure the jig saw is unplugged from the power source before Trigger attempting any assembly and/or adjustments. Lock-on Button Soft Grip Housing To install the blade (A) Fig.2, loosen the blade fixing set screw (B) which is found on the Rotary variable...
Page 4 12mm in diameter. Insert the blade into this hole to start your cut. Refer to the Parts section of the King Canada web site for the most updated parts B) Plunge cutting: You do not need to bore a starting or make a lead-in cut if you diagram and parts list.

Performance plus 8332