Page 1
Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents, repairs or alterations and lack of maintenance. KING CANADA shall in no event be liable for death, injuries to persons or property or for incidental, special or consequential damages arising from the use of our products.
SPECIFICATIONS & SPECIFIC SAFETY RULES ELECTRICAL INFORMATION 1. Hold tool by insulated gripping surfaces when performing an operation where the WARNING!: If any parts are missing, do WARNING!: Do not use this product as a cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will not operate your tool until missing parts are component of others products.
GETTING TO KNOW ADJUSTMENTS YOUR ROUTER Adjusting the Depth of Cut Place the tool on a flat surface. Lift the lock lever (A) Fig.1 and lower the tool body until the bit just touches the flat surface. Press the lock lever down to lock the tool body.
OPERATION OPERATION Edge Guide Variable Speed Selection Dial The edge guide (A) Fig.5 is effectively used for The router speed can be changed by turning the straight cuts when chamfering or grooving. speed selection dial (A) Fig.3 to a given setting from 1 to 6 (6 being the highest speed).
Contact the nearest King Canada Service Center. Use only identical replacement parts, any other parts may create a hazard. PARTS DIAGRAM & PARTS LISTS Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list.