Download Print this page
King Canada 8121S Instruction Manual

King Canada 8121S Instruction Manual

21ga. x 1/2” crown upholstery stapler kit

Advertisement

Quick Links

21GA. X 1/2" CROWN
UPHOLSTERY STAPLER KIT
MODEL: 8121S
INSTRUCTION MANUAL
COPYRIGHT © 2009 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
performance
performance
plus
plus

WARRANTY INFORMATION

2-YEAR
LIMITED WARRANTY
FOR THIS STAPLER KIT
PROOF OF PURCHASE
Please keep your dated proof of purchase for warranty and servicing purposes.
REPLACEMENT PARTS
Replacement parts for this product are available through our authorized King
Canada service centers across Canada.
LIMITED TOOL WARRANTY
King Canada makes every effort to ensure that this product meets high quality and
durability standards. King Canada warrants to the original retail consumer a 2-year
limited warranty as of the date the product was purchased at retail and that each
product is free from defects in materials. Warranty does not apply to defects due
directly or indirectly to misuse, abuse, normal wear and tear, negligence or
accidents, repairs done by an unauthorized service center, alterations and lack of
maintenance. King Canada shall in no event be liable for death, injuries to persons
or property or for incidental, special or consequential damages arising from the use
of our products.
To take advantage of this limited warranty, return the product at your expense
together with your dated proof of purshase to an authorized King Canada service
center. Contact your retailer or visit our web site at www.kingcanada.com for an
updated listing of our authorized service centers. In cooperation with our authorized
serviced center, King Canada will either repair or replace the product if any part or
parts covered under this warranty which examination proves to be defective in
workmanship or material during the warranty period.
PARTS DIAGRAM & PARTS LISTS
Refer to the Parts section of the King Canada web site for the most updated parts
diagram and parts list.
KING CANADA INC. DORVAL, QUÉBEC, CANADA H9P 2Y4
www.kingcanada.com
KING CANADA TOOLS
OFFERS A 2-YEAR LIMITED WARRANTY
FOR NON-COMMERCIAL USE.

Advertisement

loading

Summary of Contents for King Canada 8121S

  • Page 1: Warranty Information

    PARTS DIAGRAM & PARTS LISTS Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list. performance...
  • Page 2 Discharge area SPECIFICATIONS • At the workplace, always wear protective equipment such as Z87 safety glasses, hearing and head protection. Model ............................8121S Air inlet ..........................1/4” NPT Maximum permissible operating pressure ................100 PSI Recommended operating pressure range ..............60-90 PSI • Do not use a check valve or any other fitting which allows air to remain in Staple size ......................21 Ga.
  • Page 3 LOADING MAGAZINE OPERATION OPERATING YOUR STAPLER INSTALLING UPHOLSTERY STAPLES IN MAGAZINE WARNING! protect your eyes and ears. Wear Z87 safety glasses with This stapler can drive 21 Ga. x 1/2” crown upholstery staples from 1/4” side shields. Wear hearing protection. Employers are responsible for to 5/8”...
  • Page 4 After prolonged use of your stapler, the internal parts may need to be replaced caused by wear & tear. To repair, a complete Driver, Bumper & O-ring Replacement Accessory Kit is available for your stapler (model: KW-114). Contact your local King Canada distributor for more information. TROUBLESHOOTING CHART Warning: Stop using this tool immediately if any of the following problems occur.