4
4
1
2
2
ut
3
3
4
1
3
2
Units Placement Guide:
R.O. filtration unit
Remember this unit must be serviced at regular intervals. Therefore it should be reasonably
accessible (for changing filters or membrane, etc.).
No skewed cut!
To Connect the Tubing to a Fitting:
1. Remove the lock if present (not present in self-locking fittings).
1
1
2. Push. Insert the tube firmly until full stop.
3. Pull the collet back slightly.
3
4. Replace the lock (if present).
To Disconnect the Tubing:
1. Remove the lock if present (not present in self-locking fittings).
2. Push the collet and hold.
3. Pull the tubing out.
4. Replace the lock (if present).
ImPORTANT: Cut Tubing At 90° to ensure a
Watertight Seal:
9