Advertisement
To prevent leakage or cracks and ensure the safety of operation and top performance do not
15-30 min
disassemble the filters or try to regenerate them.
To change filter(s) or membrane:
shut-off the inlet
■
valve
remove the R.O. filtration unit from its place
■
for easier access (disconnect external tubes
if necessary) and open the unit's cover
take new filter (membrane) and install it in the place of the removed one observing the
■
water flow direction arrow on its label and restoring the connections (see the internal con-
nections chart for details)
or
14
shut off the tank
■
valve
times
relieve the water
■
pressure by open-
ing the filtered
water faucet
locate the filter (membrane) to be
■
changed, disconnect its inlet and outlet
fittings and remove it
Note: Remove and change back one filter at
a time, one after another. Do not remove all
filters at once to avoid mixing up the tubes.
time
Advertisement
