Related Manuals for Prio Expert M400
Summary of Contents for Prio Expert M400
- Page 1 Prio Expert ® M400 Under-sink (PoU) Multi-stage Drinking Water Ultrafiltration Slim System User’s Guide...
- Page 2 Before operating this appliance, please read the instructions carefully. You may want to save this guide for your future reference. Failure to follow the instructions or meet the operating requirements may lead to the product’s failure, malfunction, property damage or personal injury. Safety Warning Do not place the storage tank near the sources of heat, radiators, etc.
- Page 3 Description Congratulations on your purchase of the Prio® Expert filtration system! With proper instal- lation and maintenance, it will provide you with high quality drinking water for many years. This system significantly reduces or removes dirt, sand, sediment and most harmful sub- stances such as heavy metals, chlorine, microplastics, pollen, protists and other contami- nants, improves water taste and odor.
- Page 4 Specification Operating Requirements: Minimum supply water pressure: 20 psi (0.14 MPa). ■ Maximum supply water pressure: 116 psi (0.8 MPa). ■ Minimum water temperature: 41ºF (5ºC). ■ Optimal water temperature: 59-77 ºF (15-25ºC). ■ Maximum water temperature: 95ºF (35ºC) / up to 105ºF (40.5ºC) short-term. ■...
-
Page 5: Installation
Installation Notes: 1. Shut off the cold water supply under the sink or the location where the system will be installed. If the existing valve is inoperable, the water supply to the house must be shut off. Then, relieve the water pressure by opening the cold water tap. - Page 6 IMPORTANT: Cut Tubing At 90º to Ensure a Watertight Seal: No skewed cut! To Connect the Tubing to a Fitting: To Disconnect the Tubing: Remove the lock if present (not present Remove the lock if present (not present in self-locking fittings). in self-locking fittings).
- Page 7 Installation Steps: G1/2” UNEF 9/16”-24 G3/8” Install adapter ball valve (included) to the cold water supply. Adapter Adapter Use some Teflon or plumbers sealing tape to prevent leaks. Use three included threaded adapters to make different connection con- UNEF 9/16”-24 figurations (see chart for details).
- Page 8 Initial Washing: After installation it is recommended to perform the initial washing of the system. For this: open cold water supply valve ■ open the inlet valve ■ open the filtered water faucet ■ wait for water to arrive at the faucet (it may take a wile, especially ■...
- Page 9 Regular Use To get clean and safe drinking water just open the filtered water faucet. Tips: You may install the optional union tee fitting to the tubing line prior to the filtered water faucet to get another line of clean water going to the other point-of-use (such as a sink in a bath- room or ice maker in your fridge).
- Page 10 To prevent leakage or cracks and ensure the safety of operation and top performance do not disassemble the filters or try to regenerate them. To change filters: shut-off the inlet valve ■ relieve the water pressure by opening the filtered water faucet ■...
- Page 11 take new filter and install it in the place of the removed one observing the water flow direction ■ arrow on its label and restoring the connections (see the internal connections chart for details) close the cover, reconnect the external tubes and place the unit back in its place ■...
- Page 12 Prio, Prio logo are the trademarks of DWT Deutsche Wassertechnologien GmbH, Germany. As used herein, ® denotes registered trademark status in Germany only.