Advertisement
Installation Steps:
1. Install adapter ball valve (included) to the
cold water supply.
Use some Teflon or plumbers sealing tape to
prevent leaks. Use three included threaded
adapters to make different connection con-
figurations (see chart for details).
2. Create ½" hole for the filtered water faucet and install it.
Tip: If you have a soap dispenser or a water
sprayer in an existing hole you may remove it
and use its hole for the filtered water
faucet.
3. Install drain saddle.
The square foam gasket with a circle cut out must be applied to the inside of the drain sad-
dle. Remove sticky tape backing and stick to the drain saddle as shown.
10
t
G1/2"
UNEF 9/16"-24
Adapter
1
Adapter
3
G3/8"
1
4
5
7
9
11
1. Faucet
2. Chrome washer
3. Black rubber washer
4. Countertop or
sink deck
5. Black washer
G3/8"
Adapter
2
UNEF 9/16"-24
G1/2"
Adapter
1
G1/2"
UNEF 9/16"-24
2
3
6
8
10
6. Lock washer
7. Lock nut
8. Insert
9. Sleeve
10. Compression nut
11. Tubing
Advertisement
