Table of Contents
Advertisement
AU
USE OF THE TOUCH TIMER 3 KEYS (fig. 13)
The first start up
The numbers and the A letter on the display
are blinking when the oven is switched on
for the first time, or after a power cut the
appliance cannot be operated in this con-
dition. To set the hour and/or to enable the
appliance to operate press the M key for at
least 2 seconds: the A letter turns off and
the numbers now are steady on the display.
The dot (3) starts blinking: press the - or +
key to set the hour.The hour is accepted by
the programmer just few second after having
released the key.
N.B. the appliance can be correctly used for
cooking only when you will see on the display
the symbol (2).
The symbols on the display
Automatic programme is working.
1
A*
(* in some models there is the writing " Auto
instead of A)
The appliance is ready for manual use (not
2
automatic).
When blinking, the programmer is in setting
3
•
hour mode.
4
Timer set.
Decreasing numbers when setting the
5
-
timer. Also for choose your desired sound
level (3 levels available)
"Mode" key to access the programming
6
M
options of the programme.
7
+
Increasing numbers when setting the timer.
Timer
The purpose of the timer is just of a sound
signal, which can be set for a maximum time
of 23h 59min. Once elapsed the set time,
the (4) symbol turns off and a sound signal
is heard; this sound set off automatically in
7min, or you can stop it by pressing any key
of the programmer. To set the timer press
the M key for 2 seconds, or anyway just to
see the (4) symbol blinking. Set the timer by
using the + or - keys. Release the + or - key
when you have matched your desired time.
In a few seconds the current time appears
on the display together with the (4) symbol.
The countdown starts immediately from
now on.
Semi-automatic cooking
Cooking time
Once having selected a cooking function
and set the desired temperature, press the
M key for a 2 seconds time to access the
programming mode. The (4) symbol appears.
Release and press again the M key.On the
display, the A symbol starts blinking and the
"dur" writing appears on the display, then it
changes to 0*00.
Set the cooking time with the - or + keys.
(max available time: 10h).
The selected time is automatically processed
by the programmer in a few seconds, or you
can also touch the M key many times just
to see again the current time.The A and
(2) symbols will be on the display.Once the
set cooking time is finished, a sound will be
heard and the oven automatically switches
off. Please see the following paragraphs
about how to disable the sound alarm and
restarting the oven.
End of cooking
Once having selected a cooking function and
set the desired temperature, touch the M
key to access the programming mode for at
least 2 seconds.The (4) symbol switches
on. Release and touch again the M key.On
the display the A symbol starts blinking and
the writing "dur" appears. Touch again the
M key. On the display the writing "End"
appears. The last one changes few seconds
after with the symbol 0*00.
Set the end of cooking time with the keys - or
+. (maximum available time: 10h 00m). The
selected time is automatically processed by
the programmer in a few seconds, or you
can also touch the M key many time just
to see again the current time. The cooking
13
For the user
Advertisement
Table of Contents
