Shot Mark Operation Menu - Sony BETACAM SX Operation Manual

6-2 Shot Mark Operation Menu

This section describes the settings in the shot mark
operation menu.
Displaying the shot mark operation menu
Hold down the MARK button, and press the MENU
button.
6 0
MENU button
MARK button
The following menu appears on the monitor.
SHOT MARKER
GO1:SEARCH TYPE - all
GO2:LISTING TYPE
GO3:RS.MARK MODE
GO4:MARK IN REC shot1
6-2
Chapter 6 Shot Mark Function
%
9 ) p
Details of the shot mark operation menu
The shot mark operation menu comprises four items,
G01 to G04. The detailed contents appear in the
following table.
Item Item name Settings
number
G01 Select which shot mark types the
SEARCH
index function searches for, from
TYPE
the following possibilities:
all
rec start mark
shot mark 1
shot mark 2
post mark
G02 LISTING For each type of shot mark,
TYPE select whether to read into the
list (ON) or not read (OFF):
rec start mark
shot mark 1
shot mark 2
post mark
G03 RS.MARK For each type of recording,
MODE select whether to write recording
start marks (ON) or not write
them (OFF):
crash REC: crash recording
assemble: assemble editing
insert: insert editing
G04 MARK IN REC Select the type of shot mark to
write during recording and
assemble editing.
shot mark 1
shot mark 2
post mark
Changing the menu settings
The basic procedure for accessing menu items and
changing settings is the same as for the setup menus.
Note, however, the following operations for items G02
and G03.
For details of setup menu operations, see Section 7-2-2,
"Basic Menu Operations" (page 7-4).
To change the settings of items G02 and G03
Use the following procedure.
1
Press the STOP button to select the required item.
2
Hold down the JOG button and turn the search dial
to toggle the value to ON or OFF.