Extended Menu Operations - Sony BETACAM SX Operation Manual

Item number Item name
914
SDTI-CP OUTPUT BIT
RATE (only when the
BKNW-124 is installed)
915 SDTI-CP OUTPUT
FORWARD ERROR
CORRECTION (only when
the BKNW-124 is installed)

7-3-2 Extended Menu Operations

In the extended menu, you can carry out the same
operations as in the basic menu.
For details of basic menu operation, see Section 7-2-2,
"Basic Menu Operations" (page 7-4).
Note
To access the extended menu, a setting on the internal
SS-83 board is required.
For details, refer to the Installation Manual.
Menu items in the 900s, relating to digital processing (Continued)
Settings
Specify the bit rate of the MPEG stream within the SDTI-CP output signal.
50I : 50 Mbps
40I: 40 Mbps
30I: 30 Mbps
Specify whether or not the FEC (Forward Error Correction) is added to the SDTI-
CP output signal.
ON : The FEC is added.
OFF: The FEC is not added.
7-25
Chapter 7 Menu System