Table of Contents
Advertisement
7-3 Extended Menu
Item number Item name
903
FREEZE MODE
904
FREEZE CONTROL
FROM KEY PANEL
905
AUTO FREEZE
CONTROL
906
STOP FREEZE
CONTROL
911
NO COMPRESSION LINE Specify the "NO COMPRESSION" line (1 line in 1 field) for video input other than
7-24
Chapter 7 Menu System
Menu items in the 900s, relating to digital processing
Settings
Select the freeze mode and timing.
FIELD : Freeze a video field. Field may be odd or even, according to the timing.
FLD1: Freeze an odd field.
FLD2: Freeze an even field.
FRM12: Freeze a frame consisting of an odd field and following even field.
FRM21: Freeze a frame consisting of an even field and following odd field.
Odd and even fields are distinguished by the reference video signal.
Changing the menu setting during a freeze does not affect the freeze image.
The setting is reflected the next time a freeze is carried out.
Select the control panel operation for a freeze.
MOMNT : A freeze is carried out while the button is held down.
LATCH: When the button is pressed, a freeze is carried out, and this state is
maintained when the button is released. During a freeze, if the same operation
is repeated the freeze image is updated.
The operation is as follows.
• Press the DELETE button and TRIM + button on the control panel
simultaneously to carry out a freeze.
• Press the DELETE button and TRIM – button on the control panel
simultaneously to end the freeze.
Item 903 determines the details of a freeze.
Set the auto freeze function operation (conditions for ending a freeze, etc.).
During normal playback of a Betacam SX cassette tape, if there is a sudden
change of the channel condition (unrecordable signals), this function freezes the
image.
DIS : Disable the auto freeze function.
MODE1: End the freeze when signals which can be recorded normally are
restored.
MODE2: End freeze automatically on playback after stopping.
• The automatic freeze mode is determined by item 903.
• The freeze is ended immediately, regardless of the above conditions, when this
unit is switched to any of the following modes:
EDIT preset on
CUEUP mode
Recording mode
Select whether or not the STOP FREEZE function should operate.
DIS : Does not operate.
ENA: Operates.
SDTI input.
OFF : No specification.
12H ... 21H: Specify one of lines 12 to 21.
Notes
• The data in the specified line will be recorded and played back without video
data rate compression.
• Data values 0x00 and 0xFF will be converted to 0x01 and 0xFE for playback.
• For the line specified in this item, it is not possible to carry out video adjustment,
chroma adjustment, or other output adjustments.
• When item 726 is set to WIDE, a number of words at the beginning and end of
each line will be subject to horizontal blanking, and will not be played back.
• For playback of a composite signal in jog or variable mode, according to the
setting of item 705, the data will be subject to ESR (edge subcarrier reducer)
processing.
Advertisement
Table of Contents
