Table of Contents
Advertisement
2-1 Control Panels
Cuing up edit points
Hold down the IN, OUT, AUDIO IN, or AUDIO OUT
button while pressing this button to cue up to the
corresponding edit point.
3 REC (record) button
To start recording, press this button together with the
PLAY button, turning it on.
Monitoring in E-E mode
When the unit is in stop mode, when you press this
button it lights, and you can monitor the video and
audio in E-E mode. To return to the original state,
press the STOP button.
During playback, search, fast forward, or rewind,
while this button is held down you can monitor the
video and audio in E-E mode. In this case the button
does not light.
4 EDIT button
To carry out manual editing, press this button
simultaneously with the PLAY button.
Monitoring in E-E mode
When the unit is in stop mode, when you press this
button it lights, and you can monitor the input signal
selected with the ASSEMBLE button or INSERT
button in E-E mode. To return to the original state,
press the STOP button. During playback, search, fast
forward, or rewind, while this button is held down you
can monitor the video in E-E mode.
5 STOP button
To stop recording or playback, press this button,
turning it on.
When you stop playback, the unit switches either to
still playback or to E-E mode according to setup menu
settings, and the settings of the PB.EE button and PB
button.
Fault display function
This flashes in the following cases related to reference
signals:
• When the OUT REF switch on the subsidiary control
panel is set to INPUT VIDEO, and there is no input
video signal.
• When the OUT REF switch on the subsidiary control
panel is set to REF, and there is no external reference
signal input or the input external reference signal is
not synchronized to the input video signal.
2-14
Chapter 2 Location and Function of Parts
6 F FWD (fast forward) button
To fast forward the tape, press this button, turning it
on.
7 PLAY button
To start playback, press this button, turning it on.
To operate in capstan override mode
Hold down this button, and turn the search dial.
For details of capstan override mode, see the item relating
to the search dial in the next page.
8 REW (rewind) button
To rewind the tape, press this button, turning it on.
9 EJECT button
To eject the cassette, press this button. While the
cassette is being ejected, this button lights.
7 Search control section
1 SHUTTLE button
SHUTTLE
REVERSE
SHUTTLE/
VAR
JOG
5 SHUTTLE/VAR and JOG indicators
1 SHUTTLE button
To use the search dial for playback in shuttle mode,
press this button, turning it on.
For details of playback in shuttle mode, see the item for the
search dial 4.
2 JOG button
3 VAR button
JOG
VAR
FORWARD
4 Search dial
Advertisement
Table of Contents
