Playback; Preparations For Playback - Sony BETACAM SX Operation Manual

4-2 Playback

4-2 Playback
This section describes playback of video and audio.

4-2-1 Preparations for Playback

Switch settings
Before beginning playback, make any necessary
switch settings.
Audio signal selection buttons (see page 2-4) :
select the audio channel(s) to be monitored
POWER switch: ON
PB button (see page 2-8) : lit
PB controls (see page 2-4) :
adjust the audio playback levels
4-6
Chapter 4 Recording and Playback
For details of the settings of each of the switches, refer to
the pages indicated in parenthesis.
TC switch (see page 2-5) :
select the time code to be displayed
VI TC UB INTRP A IN DF LTC VITC 8F 4F 2F
CONFI ON
A OUT TCG TOTAL REMAIN 525 625
EVENT
%
INT/EXT switch (see page 2-5) : INT
CTL/TC/UB button (see page 2-8) :
select the time data to be displayed
REMOTE1(9P)/2(50P)
buttons (see page 2-6) : off
PRESET/REGEN switch
(see page 2-5) : select the output time code