Networking - Lexmark C2326 User Manual

Set up, install, and configure
For Macintosh users
1
From System Preferences in the Apple menu, navigate to your printer, and then select Options & Supplies.
2
Navigate to the list of hardware options, and then add any installed options.
3
Apply the changes.

Networking

Connecting the printer to a Wi‑Fi network
Note: This feature is available only in some printer models.
Before you begin, make sure that:
•
Active Adapter is set to Auto. From the control panel, navigate to:
Settings > Network/Ports > Network Overview > Active Adapter
For non-touch-screen printer models, press
•
The Ethernet cable is not connected to the printer.
Using the wireless setup wizard in the printer
Notes:
•
These instructions apply only to some printer models.
•
Before using the wizard, make sure that the printer firmware is updated. For more information, see
"Updating firmware" on page
1
From the home screen, touch
2
Select a Wi‑Fi network, and then type the network password.
3
Touch Done.
Using the Settings menu in the printer
1
From the control panel, navigate to:
Settings > Network/Ports > Wireless > Setup On Printer Panel
For non-touch-screen printer models, press
2
Select a Wi‑Fi network, and then type the network password.
Note: For Wi‑Fi‑network‑ready printer models, a prompt to set up the Wi‑Fi network appears during initial
setup.
to navigate through the settings.
27.
> Set up now.
to navigate through the settings.
29