Connecting The Mouse, Keyboard, Lan Cable, And Mso Cable - Agilent Technologies 90000 X Series User Manual

Connecting the mouse, keyboard, LAN cable, and MSO cable

Mouse and
A mouse and keyboard can be plugged into either USB host ports or the
Keyboard
PS/2 ports.
There are several USB host ports on the back and front panel of the
oscilloscope that can be used. (The USB device port is used for remote
control of the oscilloscope from a PC.)
When using the PS/2 ports, the mouse and/or keyboard must be plugged
in prior to turning on power to the oscilloscope.
LAN Cable
Connect your LAN cable to the RJ- 45 connector on the back panel of the
oscilloscope.
After you have connected to the LAN card, you must set up the network. Before you try to
N O T E
set up your network, you should exit the oscilloscope application.
If you do not know how to set up a network in the Windows 7 operating system, see your
network administrator or use the Windows 7 operating system's online help.
MSO Cable If the oscilloscope is an MSO model, connect the digital channels cable to
the MSO connector, making sure to orient the cable as shown on the
drawing on the back panel.
Figure 2 Back Panel
Agilent Infiniium 90000 X-Series Oscilloscopes User's Guide
Setting Up the Oscilloscope
1
15