Table of Contents
Advertisement
Figure 56. Installing the 2 x 2.5-inch rear drive module
Next steps
1. Connect all the cables to the rear drive module.
2.
Install the
drives.
3. If removed,
install the air
4. Follow the procedure listed in
Drive backplane
Depending on your system configuration, the drive backplanes supported are listed here:
Table 14. Supported backplane options
System
XC Core XC750
Figure 57.
shroud.
After working inside your
system.
Supported hard drives options
2.5-inch (x 8) NVMe backplane
2.5-inch (x 24) SAS, SATA backplane
Installing and removing system components
61
Advertisement
Table of Contents
