Dell EMC Core XC750 Installation And Service Manual page 10

Table 2. Left control panel without optional iDRAC Quick Sync 2 indicator
Item Indicator, button, or
connector
1 Status LED indicators
2 System health and system
ID indicator
Figure 4. Left control panel with optional iDRAC Quick Sync 2 indicator
Table 3. Left control panel without optional iDRAC Quick Sync 2 indicator
Item Indicator, button, or
connector
1 Status LED indicators
2 System health and system
ID indicator
3 iDRAC Quick Sync
2 wireless indicator
(optional)
NOTE: For more information about the indicator codes, see the
10 System overview
Icon Description
N/A Indicates the status of the system. For more information, see the
Status LED indicators
Indicates the system health. For more information, see the
System health and system ID indicator codes
Icon Description
N/A Indicates the status of the system. For more information, see the
Status LED indicators
Indicates the system health. For more information, see the
System health and system ID indicator codes
Indicates if the iDRAC Quick Sync 2 wireless option is
activated. The Quick Sync 2 feature allows management of the
system using mobile devices. This feature aggregates hardware/
firmware inventory and various system level diagnostic/error
information that can be used in troubleshooting the system. You
can access system inventory, Dell Lifecycle Controller logs or
system logs, system health status, and also configure iDRAC,
BIOS, and networking parameters. You can also launch the virtual
Keyboard, Video, and Mouse (KVM) viewer and virtual Kernel-
based Virtual Machine (KVM), on a supported mobile device.
For more information, see the Integrated Dell Remote Access
Controller User's Guide at www.dell.com/poweredgemanuals.
section.
section.
System diagnostics and indicator codes
section.
section.
section.