Dell EMC Core XC750 Installation And Service Manual page 14

Table of Contents

Advertisement

Figure 8.
Table 7. Rear view of the system with 4 x 2.5-inch rear drive module
Item
Ports, panels, or slots
1
Rear drive module
2
PCIe expansion card riser
2 (slot 3 and slot 6)
3
Rear handle
4
BOSS S2 module
(optional)
5
USB 2.0 port (1)
6
PCIe expansion card riser
4 (slot 7 and slot 8)
7
Power supply unit (PSU
2)
8
VGA port
9
USB 3.0 port (1)
10
iDRAC dedicated port
11
System identification
button
12
OCP NIC port (optional)
13
NIC port (1,2)
14
Power supply unit (PSU 1)
14
System overview
Icon
Description
N/A
Enables you to install drives supported on your system.
N/A
The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion cards
supported on your system, see the
N/A
To lift the system.
N/A
This slot supports the BOSS S2 module.
This port is USB 2.0-compliant.
N/A
The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion cards
supported on your system, see the
For more information about the PSU configurations, see the product
documentation page.
For more information about the PSU configurations, see the product
documentation page.
This port is USB 3.0-compliant.
Enables you to remotely access iDRAC. For more information, see the
iDRAC User's Guide at www.dell.com/poweredgemanuals.
Press the system ID button:
● To locate a particular system within a rack.
● To turn the system ID on or off.
To reset iDRAC, press and hold the button for more than 16 s.
NOTE:
● To reset iDRAC using system ID, ensure that the system ID
button is enabled in the iDRAC setup.
● If the system stops responding during POST, press and hold
the system ID button (for more than 5 s) to enter the BIOS
progress mode.
N/A
This port supports OCP 3.0. The NIC ports are integrated on the
OCP card which is connected to the system board.
The NIC ports are embedded on the LOM card that is connected to
the system board.
For more information about the PSU configurations, see the product
documentation page.
expansion card guidelines
expansion card guidelines
section.
section.

Advertisement

Table of Contents
loading

Table of Contents