Communication; Network - Fronius Tauro 50-3 Operating Instructions Manual

Communication

Network

Server addresses for data transfer
If a firewall is used for outgoing connections, the following protocols, server addresses
and ports must be allowed for successful data transfer:
-
-
-
-
-
-
-
LAN:
1
2
3
4
The connection is established.
WLAN:
Establishing a connection via WPS:
1
2
The connection is established automatically.
Select and connect WLAN network:
The networks found are shown in the list. Clicking on the refresh button
second search of the available WLAN networks. The "Find network" input field can be
used to further restrict the selection list.
1
2
3
4
5
The connection is established.
Tcp fronius-se-iot.azure-devices.net:8883
Tcp fronius-se-iot-telemetry.azure-devices.net:8883
Tcp fronius-se-iot-telemetry.azure-devices.net:443
Udp sera-gen24.fronius.com:1194 (213.33.117.120:1194)
Tcp froniusseiot.blob.core.windows.net:443
Tcp provisioning.solarweb.com:443
Tcp cure-se.fronius.com:443
Enter host name.
Select connection type "automatic" or "static".
For connection type "static" - enter IP address, subnet mask, DNS and gateway.
Click on the "Connect" button.
Click the "Enable" button.
Activate WPS on the WLAN router (see documentation provided with the WLAN
router).
Select network from the list.
Select connection type "automatic" or "static".
For connection type "automatic" - enter WLAN password and host name.
For connection type "static" - enter IP address, subnet mask, DNS and gateway.
Click on the "Connect" button.
will carry out a
69