Protection Of People And Equipment; Safety; Warning Notices And Rating Plate On The Device - Fronius Tauro 50-3 Operating Instructions Manual

Protection of people and equipment

Safety

Danger due to incorrect operation and incorrectly performed work.
This can result in serious injury and damage to property.
▶
▶
▶
Danger from electromagnetic fields. Electromagnetic fields are generated during
operation.
Effects on the health of persons, e.g. those wearing a pacemaker can result.
▶
Warning notices There are warning notices and safety symbols on and in the inverter. These warning no-
and rating plate tices and safety symbols must not be removed or painted over. They warn against incor-
on the device rect operation, as this may result in serious injury and damage.
Symbols on the rating plate:
WARNING!
All the work and functions described in this document must only be carried out by
trained and qualified personnel.
Read and understand this document.
Read and understand all the Operating Instructions for the system components, es-
pecially the safety rules.
WARNING!
Do not remain closer than 20 cm from the inverter for a prolonged period of time.
CE mark – confirms compliance with applicable EU directives and regulations.
UKCA mark – confirms compliance with applicable UK directives and
regulations.
WEEE mark – waste electrical and electronic equipment must be collected
separately and recycled in an environmentally sound manner in accordance
with the European Directive and national law.
RCM mark – tested in accordance with the requirements of Australia and New
Zealand.
A 4-digit number (coded production date)
is printed at the very bottom of the rating
plate, from which the production date can
be calculated.
If you subtract the value 11 from the first
two digits, you get the production year.
The last two digits represent the calendar
week in which the device was produced.
Example: Value on rating plate = 3205
32 - 11 = 21 → Production year 2021
05 = Calendar week 05
13