Electrolux EOC5851FOX User Manual page 36

36 www.electrolux.com
sharp-edged objects or a dishwasher. It
can cause damage to the nonstick
coating.
Clean the moisture from the cavity after
each use.
12.2 Removing the shelf
supports
To clean the oven, remove the shelf
supports.
CAUTION!
Be careful when you remove
the shelf supports.
1. Pull the front of the shelf support
away from the side wall.
2. Pull the rear end of the shelf support
away from the side wall and remove
it.
1
Install the removed accessories in the
opposite sequence.
The retaining pins on the
telescopic runners must
point to the front.
12.3 Pyrolysis
CAUTION!
Remove all accessories and
removable shelf supports.
The pyrolytic cleaning
procedure cannot start:
2
• if you did not remove the core
temperature sensor plug from the
socket.
• if you did not fully close the oven
door.
Remove the worst dirt manually.
CAUTION!
If there are other appliances
installed in the same
cabinet, do not use them at
the same time as the
function: Pyrolysis. It can
cause damage to the oven.
1. Clean the inner side of the door with
hot water, so that the residues do not
burn from the hot air.
2. Turn on the oven and select from the
main menu the function: Pyrolysis.
Press to confirm.
3. Set the duration of the cleaning
procedure:
Option
Quick
Normal
Intense
4. Press to confirm.
When the pyrolytic cleaning
starts, the oven door is
locked and the lamp does
not work.
To stop the pyrolytic
cleaning before it is
completed, turn off the oven.
WARNING!
After the function is
completed, the oven is very
hot. Let it cool down. There
is a risk of burns.
Description
1 h for a low
degree of dirt
1 h 30 min
for a usual
degree of dirt
3 h for a high
degree of dirt