Electrolux EOC5851FOX User Manual page 19

Saving a programme
1. Turn on the oven.
2. Set a heating function or an
automatic programme.
3. Press again and again until the
display shows: SAVE.
4. Press to confirm.
The display shows the first free memory
position.
5. Press to confirm.
6. Enter the name of the programme.
The first letter flashes.
7. Press or
8. Press .
The next letter flashes.
9. Do step 7 again as necessary.
10. Press and hold
You can overwrite a memory position.
When the display shows the first free
memory position, press
press to overwrite an existing
programme.
You can change the name of a
programme in the menu: Edit
Programme Name.
Activating the programme
1. Turn on the oven.
2. Select the menu: Favourites.
3. Press to confirm.
4. Select your favourite programme
name.
5. Press to confirm.
You can press to go directly to menu:
Favourites.
10.2 Using the Child Lock
When the Child Lock is on, the oven
cannot be turned on accidentally.
If the Pyrolysis function
works, the door locks
automatically.
A message comes on in the
display when you press any
symbol.
to change the letter.
to save.
or and
1. Press to turn on the display.
2. Press and
until the display shows a message .
To turns off the Child Lock function
repeat step 2.
10.3 Function Lock
This function prevents an accidental
change of the heating function. You can
turn it on only when the oven works.
1. Turn on the oven.
2. Set a heating function or setting.
3. Press again and again until the
display shows: Function Lock.
4. Press to confirm.
If the Pyrolysis function
works, the door is locked
and the symbol of a key
comes on in the display.
To turn off the function, press
display shows a message. Press
again and then
When you turn off the oven,
the function also turns off.
10.4 Set + Go
The function lets you set a heating
function (or a programme) and use it
later with one press of any symbol.
1. Turn on the oven.
2. Set a heating function.
3. Press again and again until the
display shows: Duration.
4. Set the time.
5. Press again and again until the
display shows: Set + Go.
6. Press to confirm.
Press any symbol (except for
the function: Set + Go. The set heating
function starts.
When the heating function ends, a signal
sounds.
ENGLISH
at the same time
. The
to confirm.
) to start
19