Toshiba TOSVERT VF-MB1 Function Manual page 5

■ General Operation
▼ Never disassemble, modify or repair.
Doing so could result in electric shock, fire and injury. For repairs, call your sales
Disassembly
prohibited
agency.
▼ Do not attach this option to any drive other than the VF- MB1/S15/AS3.
Doing so could result in electric shock or fire.
Prohibited
▼ When the drive is energized, never detach the this option from the VF- MB1/S15/AS3.
Doing so could result in electric shock.
▼ Don't place or insert any kind of object into the PDP003Z (electrical wire cuttings, rods,
wires).
Doing so could result in electric shock or fire.
▼ Do not allow water or any other fluid to come in contact with the PDP003Z.
Doing so could result in electric shock or fire.
▼ Turn off the VF- MB1/S15/AS3 when installing and wiring this option.
▼ If the drive begins to emit smoke or an unusual odor, or unusual sounds, immediately
Mandatory
turn power off.
If the equipment is continued in operation in such a state, the result may be fire. Call
your local sales agency for repairs.
■ Transportation & installation
▼ Do not operate the drive if it is damaged or any component is missing.
Doing so could result in electric shock or fire. Call your local sales agency for repairs.
Prohibited
▼ Do not place any inflammable substances near the VF- MB1/S15/AS3 drive.
If an accident occurs in which flame is emitted, this could lead to fire.
▼ Do not install in any location where the drive could come into contact with water or other
fluids.
Doing so could result in electric shock or fire.
▼ When installing this option, be careful not to touch the leads from parts on the reverse
side of its circuit board.
Doing so could result in injury.
▼ Operate under the environmental conditions prescribed in the instruction manual.
Operations under any other conditions may result in malfunction.
Mandatory
Warning
Warning
- 3 -
E6581738④