Yamaha SX500D Supplementary Service Manual page 86

CABLE ROUTING
500
1 Wire lead (electrical starter model)
2 Fasten the throttle cable, water
temperature sensor lead, carbu-
retor switch lead and solenoid
lead with a plastic clamp.
3 Carburetor switch coupler
4 Fasten the throttle cable and oil
pump cable with a plastic clamp.
5 Coolant hose
6 Starter relay lead
7 Starter relay sub lead (electrical
starter model)
8 Fasten the wire harness, battery
negative lead and coolant hose
with a plastic clamp. (electrical
starter model)
9 Route the battery lead along the
behind coolant hose.
Brake hose
10
To battery negative terminal
11
Battery negative lead
12
To starter relay
13
To reverse gear
14
Gear position switch lead (for
15
model with reverse)
Route the main switch harness
16
along the under of the oil and fuel
breather hose.
Route the parking brake cable
17
along the under of the oil breath-
er hose.
Main switch assembly
18
Starter cable assembly
19
Oil pump cable
20
Throttle cable
21
Variable resister
22
Oil level gauge
23
Variable resister coupler
24
Ignition coil coupler
25
Ignition coil
26
Carburetor heating lever
27
Coolant hose
28
Speedometer cable
29
Water temperature sensor coupler
30
Drive V-belt guard bracket
31
Under 50 mm (1.97 in)
32
Fasten the speedometer cable
33
and wire harness with a plastic
clamp.
CABLE ROUTING
–82–
SPEC