Table of Contents
Advertisement
COOLING SYSTEM
16. Inspect:
S Cooling system
Decrease of pressure (leaks) ! Repair as
required.
Inspection steps:
S Attach the cooling system tester
(90890-01325, YU-24460-01) to the coolant
filler 2 .
S Apply 100 kPa (1.0 kg/cm
S Measure the pressure with gauge.
2E081
Water pump belt deflection adjustment
1. Remove:
S Muffler
2. Check:
S Drive belt deflection
Out of specification ! Adjust.
Drive belt deflection
8 mm (0.31 in)
120 N (12 kg, 26 lb)
(NEW BELT)
8 mm (0.31 in)
130 X 220 N (13 X 20 kg,
28.7 X 44.1 lb)
–7–
INSP
ADJ
1
2
, 14 psi).
Advertisement
Table of Contents
