Yamaha SX500D Supplementary Service Manual page 106

Oil pump cable
1
Throttle cable
2
Fasten the wire harness.
3
Do not fasten the throttle cable
and oil pump cable.
Thumb warmer coupler
4
Engine stop switch coupler
5
Route the throttle cable and oil
6
pump cable through the clamp.
Grip warmer lead
7
Brake light switch coupler
8
Head light switch coupler
9
Fasten the oil breather hose and
10
wire harness with a plastic clamp.
Parking brake cable
11
Oil breather hose
12
Fasten the oil breather hose with
13
a plastic clamp.
Fasten the wire harness and oil
14
breather hose behind the steer-
ing colum with a plastic band.
Do not fasten the parking brake
cable and brake hose.
Grip warmer control knob
15
Fasten the wire harness and fuel
16
breather hose with a plastic clamp.
Ground lead
17
Fuel sender coupler
18
Oil level switch coupler
19
Bolt
20
Fuel breather hose
21
Spring compression
22
Clip
23
Fuel pipe
24
To the carburetor
25
Spring compression
26
Pulser hose
27
Oil hose
28
To the carburetours
29
To the oil pump
30
Wire harness
31
Fasten the wire harness at the
32
white tape mark.
Oil hose
33
Coolant hose
34
To the conduction
35
Back buzzer (for model with re-
36
verse)
CABLE ROUTING
–102–
SPEC