Create Configured Card - Promag Mifare DESFire DF7 Series User Manual

PROMAG

3.4 Create Configured Card

DF7XX reader supports updating the reader by reading Configured Card.
This function is specially using when stand alone system.
The following steps indicate you to create a configure card:
Step 1:
Configure the reader.
Enable the "Configured
Card Enabled" item, and
then press [Update
Reader].
Step 2:
Connect the PCR310 to PC
for issuing card.
Select the series
corresponding, or load
the configuration file.
Select the reader's
model name.
Click "OK"
30
DF7XX
REV.E