Wiegand Setting - Promag Mifare DESFire DF7 Series User Manual

DF7XX
PROMAG
REV.E

Wiegand Setting

Add Reader ID: (default=Disable)
Set Wiegand output data to include the Reader ID when it is checked.
Custom Premable: (default=Disable)
Set the Wiegand output data to include premable code when it is enabled.
This code only combines with CSN output.
Number of Bits: (default=26)
Set the Wiegand output type you want to meet your host (or terminal). It can be 1 to 128.
With parity: (default=Enable)
Set data with or without parity bit. If this is enabled, it will automatically add parity bit when sending
output data.
Bit Sequence: (default=Standard)
Set the Wiegand output data sequence, and it can be a standard data sequence (MSB first) or a
reverse data sequence (LSB first).
Byte Order: (default=High Byte First)
Set the Wiegand output data byte order, and it can be high byte first or low byte first.
Alive Event is reserved.
24