Led / Buzzer Settings - Promag Mifare DESFire DF7 Series User Manual

PROMAG

LED / Buzzer Settings

DF7XX supports LED/Alarm configure. Set the LED/Buzzer to indicate the system status for
end-user.
Enable RS232 Command Set Control:
Enable this setting if you need to control LED/Buzzer by software command set.
Remark:
If "Enable RS232 Command
Set Control (for LED/Buzzer)"
is checked, the external
LED/Buzzer with high/low
level control will be disabled.
21
DF7XX
REV.E