Desfire Settings - Promag Mifare DESFire DF7 Series User Manual

DF7XX
PROMAG
REV.E

DESFire Settings

MAD-AID: (default=F47030)
™
MAD Application Identifier number is authorized and assigned by Mifare.net upon the customer's
request for registered Application Identifier in a Mifare application open system
(AID:000000h~FFFFFFh).Or it is also possible for the user to define the AID himself for the
application in user defined closed system without registering into MAD group. According to the AID,
DF7XX reader can find and read the corresponding application on the card.
File ID: (default=0)
File ID is 0~15. There are three file types. Data file, Value file and Record file. DF7XX reader will
auto detect the type and output the data.
Offset/Length: (default=0 / 5)
The Data file will depend on the value to output data. The Value file will be sent the value out. The
Record file will be sent the latest record data.
Access Key No/Value: (default=0 / 00000000000000000000000000000000)
Key must be the same as the Read or Read/Write KEY of the card issued. This means DF7XX
reader only can read the data on the card with the same key.
DF App Admin Key (KeyNo = 0)
17