PROMAG
Reader Settings
Reader ID: (default=0)
DF7XX reader ID for multi link application. (ID: 0~63)
Interface: (default=Wiegand)
DF7XX reader can be set as Wiegand, RS232 or ABA-TK2 output.
Read Modes: (default=Card Data Only)
1. Card Data Only
2. Card Data or CSN
3. CSN Only
Read card sector data only. If any error occurs (ex: App. key incorrect.), the reader
will represent "Card Invalid" status.
Read card sector data. When any error occurs (ex: App. key incorrect.), the reader
will output "CSN".
Read card CSN (card ID) only.
18
DF7XX
REV.E