Caple SP611 Instruction Manual page 19

How to replace the charcoal filter
- Pull the front panel to open it
- Remove the grease filter
- Squeeze the clips on the charcoal filter pulling the filter towards you to remove it.
- Reverse steps to fit replacement filter
Replacing the bulbs
- This extractor is fitted with a 3W LED light bar. The illumination is designed for
use during cooking and not for prolonged periods of time to light the kitchen.
Prolonged use of the lights may reduce the lifetime of the bulbs.
Warning
- Do not touch or change the bulbs when the hood is operating. Wait until the
bulb is cool before removing.
- Use the same bulbs as the originals (3W LED). Replacement bulbs are available
from www.caple.co.uk.
Removing the LED lights
- 1. Open the centre panel and remove the grease filter.
- 2. From inside the hood, loosen the screw
- 3. Unplug the light from the wiring harness. Avoid direct contact between the
lens and your hand
- 4. Replace the damaged lamp by reversing the steps
Please keep this instruction manual for future reference
Instruction manual SP611 / SP911 19