Caple SP611 Instruction Manual page 13

- Mount the hood on the wall screws. Align it in a horizontal position relative to
cabinets. When the hood has been adjusted, secure unit by tightening screws
(A).
- Connect duct tube (not included) to the exhaust piece using duct tape on all
seals (B).
Fixing the chimney flu
- Carefully loosen but do not separate the telescopic chimney duct pieces.
- Arrange the electrical power supply within the dimensions of the chimney duct.
- Adjust the width of the support bracket to match the upper duct. Fix it to the
ceiling using the screws so that it is centred in line with your hood and at a
distance from the ceiling indicated.
B
A
Instruction manual SP611 / SP911
Please keep this instruction manual for future reference
13