Table of Contents
Advertisement
Settings
To adjust the navigation settings, tap the middle of the screen to access the navigation
menu and swipe the screen from right to left to access the next set of menu options and
press the "Settings" button.
Vehicle type
Tap here to switch between 'Car' and 'Motorhome/Caravan' mode or 'Car' and 'Truck' mode
depending on the unit purchased.
MPH/KMH – select speed/distance unit type
This option allows you to choose which measurement you want the screen to display.
Make your selection and press the 'Return' button to save and exit.
Vehicle Icon – Select which icon you would like to represent your
vehicle on the map
This option allows you to choose the icon which represents your vehicle as it appears
on the screen. You can choose between the default arrow icon, a car, a truck or a
motorhome. Make your selection and press the 'Return' button to save and exit. Please note
that you can select a different vehicle icon for each mode, car, motorhome/caravan or truck.
Speed trap alerts
Your sat nav is already preloaded with the Speedshield speed trap database but you can
still choose whether you want it to alert to GPS speed traps, mobile speed trap locations,
red light cameras, or alert to nothing at all. You can also separately select whether to receive
audible alerts. Make your selection and press the 'Return' button to save and exit.
Hazard & restriction alerts – Truck, Motorhome & Caravan Edition only
This option allows you to choose if you want visual and audible warnings to be emitted
as you approach a hazard or legal restriction such as a weight restriction. Make your
selection and press the 'Return' button to save and exit.
Report mobile speed traps
Please note this function will only work if you pair or tether your device with an internet
enabled Smart phone or iPhone. See more detailed instructions on p47 of this user manual.
Record and share the locations of Mobile speed traps with other user's. Make your
selection and press the 'Return' button to save and exit.
E Speed - User speed alert
Set your device to alert if you accidentally exceed the posted speed limit. To set the User
speed alert warning, move the slider to increase or decrease the value over the posted
speed limit you would like the device to alert at. For example, if you would like the device
to alert at 5mph over the posted speed limit ie 35mph in a 30mph zone, set the value to '5'.
Make your selection and press the 'Return' button to save and exit.
Alert Audio
There are two different audio tones to choose from. Choose between Tone 1 and Tone 2.
Make your selection and press the 'Return' button to save and exit.
35
Advertisement
Table of Contents
