Table of Contents
Advertisement
Route by map
This function allows you to navigate to a destination by selecting any road on any area
of the map. To navigate using this function press the middle of the screen to access the
"Navigation" menu and press "Route by map".
The screen will then show a section of the map. You can zoom in and out of the map by
'pinching' and 'stretching' the screen with your fingers, as well using your finger to move
the map around until you find the location you are looking for.
When you see the location you require, press on the road on the map with your finger and
the name of the road, together with the coordinates will be displayed at the top of the
screen. Press the "tick" button to proceed.
User note. It is easier to select the road you are looking for by 'zooming' more
closely in to the map.
Once you have pressed the "tick" button, information about your chosen destination will be
displayed, together with the Route settings you can select for this journey.
•
To start your journey press "Calculate"
•
To view the destination point of this route on the map, press the "Map" icon displayed at
the top right hand corner of the screen.
•
To return to the previous screen press the "Return" button.
•
To change the start location or add a 'Via' point press the small drop down menu
displayed at the top right hand corner of the screen.
Once the calculation is complete the summary screen will be displayed confirming the
address you wish to navigate to, your start point, your distance to the destination, your
estimated arrival time , your estimated journey time and any "Route settings" you may have
selected.
Navigation will begin automatically within 10 seconds if you do not touch the screen or you
can press the "Aguri" logo to proceed immediately. If you want to spend more time viewing
the Summary screen, tap anywhere on the screen to stop the automatic countdown.
Further options are available if you press the small drop down menu icon found at the top
right hand corner of the display.
•
Press "Simulation" to show a simulation of the route that has been calculated.
•
Press "Guide" to see a description of the calculated route turn by turn, road by road.
•
Press "Avoid road" if you would like to re-calculate the route avoiding a specific road.
Once you are ready to proceed, press the "Aguri" icon to start navigating.
Route to junction.
This function allows you to navigate to a specific junction. To navigate using this function
press the middle of the screen to access the "Navigation" menu and scroll until you see the
"Route to junction" icon.
Enter the Road number followed by the junction number and a map view of the junction will
be displayed. Tap the screen to pinpoint exactly where you want to navigate to and select
'Continue' from the 'Quick menu' to proceed.
28
Advertisement
Table of Contents
