Mph/Kmh - Select Speed/Distance Unit Type; Lane View; Route Alarm; Alert Audio - aguri AGR700 SERIES User Manual

Settings
Press the middle of the screen to access the navigation menu and press the "DEVICE
SETTINGS" button at the top right hand corner of the screen. Select the "Settings" button
and press it once to enter the general Settings menu.
2D or 3D – Select map view.
This option allows you to choose the map view you prefer to have displayed on the screen.
The 3D view is the default factory setting. Make your selection and press the 'Return'
button to save and exit.
MPH/KMH – select speed/distance unit type.
This option allows you to choose which measurement you want the screen to display.
Make your selection and press the 'Return' button to save and exit.
Icon – Select which icon you would like to represent your vehicle on
the map.
This option allows you to choose the icon which represents your vehicle as it appears
on the screen. You can choose between the default vehicle icon, a car, a truck or a
motorhome. Make your selection and press the 'Return' button to save and exit.

Lane view

Lane view will show which lane or lanes you should use at a junction, motorway
intersection or exit. This option will only work when a route has been calculated. Make your
selection and press the 'Return' button to save and exit.
Speed trap alerts.
Your sat nav is already preloaded with the Speedshield speed trap database but you can
still choose whether you want it to alert to GPS speed traps, mobile speed trap locations,
red light cameras, or alert to nothing at all. You can also separately select whether to
receive audible alerts. Make your selection and press the 'Return' button to save and exit.
Hazard alerts – Truck, Motorhome & Caravan Edition only.
This option allows you to choose if you want visual and audible warnings to be emitted
as you approach a hazard or legal restriction such as a weight restriction. Make your
selection and press the 'Return' button to save and exit.

Route alarm

If you deviate from a calculated route the unit will automatically recalculate a route. To
indicate that re-routing is in progress the unit will emit an audible tone. This option allows
you to choose if you want a beep tone to be emitted during recalculation. Make your
selection and press the 'Return' button to save and exit.

Alert Audio

There are two different audio tones to choose from. Choose between Tone 1 and Tone 2.
Make your selection and press the 'Return' button to save and exit.
35