Table of Contents
Advertisement
3.
Your device should now be displayed as USB storage device on your PC. It will show
up as an additional Drive such as 'AGR720 (E:)'. Go to 'File Explorer' on your PC and
you should see the new Drive displayed in the list on the left hand side as per the
screen shot below.
4.
Left click on the AGR520/720 Drive to display the folders that are stored on the
internal memory of your unit. Next, double left click on the folder named 'yourpoidb' to
open it and then either 'copy and paste' or 'drag and drop' your .csv POI file in to it.
Left click on the
AGR720 Drive to
display the folders
that are stored on
your device.
5.
Disconnect your device from your PC by pressing the button 'Turn off USB storage' on
the device and then pressing the 'Home' button at the bottom, centre of the screen to
return to the main Menu.
6.
To check that your POIs have been added successfully, press 'Navigate' from the
main Menu to launch the navigation software and once loaded tap on the centre of
the screen to open the navigation menu. Press the 'Your POI' button and you should
now see your new POI folder displayed. Tap on the folder to view its contents. You can
search for a POI either by its name or calculate a route to a POI based on POIs around
your current location or press and hold the location to change the address/location
and search for POIs around a different location of your choice.
Tap on 'Your POI'
to see a list of POI
folders you have
added to the device.
Double left click on
'Yourpoidb' to open
it and then either
copy and paste or
drag and drop your
list of POIs in to it.
53
Advertisement
Table of Contents
