Table of Contents
Advertisement
Calculating a route using an address or postcode
1. To begin navigating, press the 'Navigate' button on the Main menu. Please note that it
can take a few minutes for the unit to boot-up and then to achieve a satellite lock the first
time you use it. We recommend you stay in a stationary position, in a location where the
unit has a clear view of the sky to ensure the fastest results. Subsequent start-ups will be
much faster however, and your device will locate satellites within a few seconds when used
regularly. Once satellite lock is achieved, the screen will indicate your current position on
the map view displayed.
2. Touch the centre of the screen to enter the navigation menu and select 'Address'. Enter
the post code and the rest of the address as necessary, until you see the address required
appear below the data entry boxes. Press the highlighted address to continue.
Select Address to
calculate a route using
a post code or place
name.
The first time you use
the device you will need
to enter the country. The
unit will remember the
country selected for next
time, so that it will be
faster to enter addresses
in the future.
7
Advertisement
Table of Contents
