Table of Contents
Advertisement
Route by coordinate
To navigate to a destination using a coordinate press the middle of the screen to access the
"Navigation" menu. Scroll until you see the "Route by coordinate" icon and press it once.
Enter the coordinate using the key pad and then press "OK".
There are four different formats you can use when entering a coordinate:
•
Degrees, Minutes, Seconds
•
Degree Decimal Minutes
•
Decimal Degrees
•
Grid Reference
User note. When entering the Longitude you must ignore the minus (-) symbol.
After pressing "OK" the location of the coordinates will be shown on the map. If they are
correct, press the "tick" button and then follow the on screen instructions to calculate
a route.
Recalculate route
You have the option to recalculate your route if you want to avoid certain roads. However
this facility is only available once you have calculated a route. If the "Recalculate route" icon
is greyed out this means a route has not been entered and the option will not be available.
To recalculate a route, press the middle of the screen to access the "Navigation" menu and
press the "Recalculate route" icon. You can then choose how you want to recalculate your
route from the options displayed.
Avoid road
If you know the road number or name you want to avoid then select this option. Press
"Avoid road" and the unit will show you details of your route and a list of the road names
and numbers to be used. Use the up and down arrows at the right hand side of the screen
to see more details.
Next, select the road you want to avoid by pressing it once and the route will be
recalculated and displayed on the screen. The original route is shown in blue and the new
route in yellow. Select your preferred route by pressing the appropriate coloured button at
the bottom of the screen.
Once you select a route the unit will automatically switch to the Navigation Map View screen
and start to navigate. Note that the summary screen and route options will not be displayed
at this time.
Avoid by distance
This function allows you to avoid several roads from the calculated route so that you can re-
calculate the route over a defined distance, ranging from 1 mile to a maximum of 100 miles.
To use this function press the "Avoid by distance" button and the screen will show a
distance 'slider'. Use your finger to adjust the slider to the required distance and press the
"Calculate" button. The route will be recalculated and displayed on the screen. The original
route is shown in blue and the new route in yellow. Select your preferred route by pressing
the appropriate coloured button at the bottom of the screen.
29
Advertisement
Table of Contents
