Table of Contents
Advertisement
How to add your own POIs (Points of interest) to your
satellite navigation system
1.
First of all you need to make sure that your list of POIs is in a format that is compatible
with your sat nav. Your POIs need to be in a .csv format Excel spreadsheet with the
Longitude in column A, Latitude in column B, and the name of the POI in column C,
as per the example below. As long as the data is entered in to the correct column as
shown in the example below, you can add as many rows of data as you like.
Please note that you will need software version 1.2.11 or later installed on your
device to enable you to add your own POIs. Please refer to the user manual for
instructions on how to update the software on your device if you are not familiar
with the software update procedure.
2.
Power on your device and when the main Menu appears on the display, connect it to
your PC using the micro USB data cable provided with your device. Once connected
to your PC, your device should display a new screen displaying the message 'USB
connected' as per the screen shot below. Press the button 'Turn on USB storage' and
then 'OK' when the next pop-up window is displayed asking for confirmation.
52
Press the 'Turn
on USB storage'
button to establish
a connection
between your
device and your PC.
Advertisement
Table of Contents
